What should I pay attention to when buying wood veneer? The following wood veneer manufacturers come to analyze.

    Please select the grade first: the wood used in the general house must reach the E1 grade, and the polished and polished furniture board only needs to reach the E2 grade to enter the room. Therefore, when purchasing wood veneers, we can ask the wood veneer manufacturers for documents such as inspection reports and quality inspection and quarantine certificates. The E1 level in our country's specification is the formaldehyde concentration. 1.5mg/L, E2 level is 5mg/L formaldehyde concentration.

    Wood veneer is made of general wood (such as poplar) as raw material, and uses software simulation to simulate technical and new technological methods to create imitation of pure natural wood and polish it. Another kind of synthetic veneer is a synthetic veneer made of pure natural veneer made of plastic, plastic film and paper imitating salty infringement. The two methods of mountain grain wood veneer are the more common ways to replace pure natural wood veneer on the market at this stage. Devices made from different types of tree roots have different design styles. Its performance and characteristics are also different.

    The principle of cutting wood veneer

    1. As far as possible, it should be divided according to the specifications of the standard board;

    2. Minimize the specifications of the wall, indoor space and block brick control module, and adjust the random specifications according to the adjustment of the furniture board;

    3. If there is a top angle line and a moral bottom line, please separate and polish it from the middle wood, which is conducive to transportation and installation.

    What is the sequence of the whole process of installing wood veneer? Let's study it below.

    1. First get the big veneer, and then install the small veneer.

    2. First install the wall material and grind, then install the door cover, pole, window, etc.

    3. Install the wood plank first, and then install the top angle line, body curve, foot line, etc.

    4.Wooden finishes include soft packs, mirrors, laminated glass and wallpaper. First install the wood grinding and polishing, and then install the hardware package, mirror, laminated glass, wallpaper, etc.